EBARA ESA500W Скачать руководство пользователя страница 4 | Manualshive

Страница: 4 / 81

EBARA ESA500W Скачать руководство пользователя страница 4

（

ii

）

PM10U

EBARA

CORPORATION

Safety Information

It is essential that those operating this pump should have the knowledge to identify and avoid
hazardous conditions associated with the pump.

Inadequate or rash operation may cause dangerous and serious accidents.

Before  installation  and  operation,  the  operator  should  first  have  a  good  knowledge  of  the
pump construction, operation procedure, and its hazards.
The  operator  should  read  through  this  instruction  manual  and  other  documents  issued  by
EBARA in detail.

If  you  have  any  questions  on  pump  operation,  safeties,  and  maintenance,  please  do  not
hesitate to contact EBARA directly. Refer to Global network for contact address.

Three terms designating the level of hazard are used in this manual.

DANGER

Indicates an imminently hazardous situation which, if not avoided,

will result in death or serious injury.

WARNING

Indicates a potentially hazardous situation which, if not avoided,

could result in death or serious injury.

CAUTION

Indicates an imminently hazardous situation which, if not avoided,

may result in minor or moderate injury.

This term may also be used as a warning for situations liable to

damage to equipment.

«
...
2
3
4
5
6
...
»

Содержание ESA500W


















































































Отзывы:

Нет отзывов