EBARA Ego 2 slim, Инструкция по установке и эксплуатации

Страница: 23 / 118

23
ELECTRICAL SPECIFICATIONS OF INPUTS, OUTPUTS AND COMMUNICATION
To see inputs, outputs and communication functions see chapter 5 Setup and operation. Some of the functions
are available only on Ego 2 slim and Module C. Detailed specifications about used protocols are described in
communications manual.
3.4.2.1 DIGITAL INPUT (RUN, 0V)
Electrical properties
Ego 2 slim resistance of the closed loop 100 Ω
3.4.2.2 ANALOG INPUTS AND OUTPUTS (SET1,SET2,SET3)
Only available in variant Ego 2 slim and Module C. U variant pumps only have an anlog 0-10V input. C variant
pumps have three connections that can be used either as inputs or outputs, depending on how we set it.
Electrical properties
Input voltage –1 - 32 VDC When used as input.
Output voltage 0 - 12 VDC When used as an output. MAX II. 5 mA load on individual output.
Input impedance ~100 kΩ 0.5 mA additional load for most configurations.
Input sink current 0 - 33 mA Common sink on COM, if used as output.
Galvanic isolation Voltage 4 kV up to 1 s, 275 V permanent.
3.4.2.3 RELAY OUTPUT
Electrical properties
Pump type Ego 2 (TC) slim < 850 W Ego 2 (TC) slim > 850 W
Rated current 3 A 8 A
MAX IIimum voltage 250 VAC, 30 VDC 250 VAC, 30 VDC
MAX IIimum power 300 VA 500 VA
3.4.2.4 ETHERNET
Only available in variant Ego 2 slim and Module C.
Electrical properties
Connector RJ-45, 10BASE-T, 10 Mbit/s.
Services
-Web server (port 80)
-Software update through web interface.
- Modbusa RTU through TCP/IP
Default IP address 192.168.0.245 (192.168.0.246 for right pump)
Ethernet visual
diagnostics
LED1
Slowly blinking if module is on. Lights up when the connection is established.
LED2
• Only potential-free contact can be connected to this input.