EBARA 4OY series, Руководство по эксплуатации и техническому обслуживанию

Страница: 6 / 56

6
EN
INSTRUCTION MANUAL REGARDING USE AND
MAINTENANCE
INDEX
1. INTRODUCTION page 6
2. MANUFACTURER IDENTIFICATION DATA page 6
2.1 MANUFACTURER
page 6
3. GUARANTEE AND TECHNICAL ASSISTANCE page 6
4. GENERAL SAFETY WARNINGS page 6
4.1 PREVENTIVE MEASURES TO BE TAKEN BY THE USER
page 6
4.2 IMPORTANT PROTECTIONS AND CAUTIONS
page 6
4.3 RESIDUAL RISKS OF THE PRODUCT
page 7
5. HANDLING AND STORAGE page 7
5.1 HANDLING
page 7
5.2 STORAGE
page 7
6. TECHNICAL PRODUCTION CHARACTERISTICS page 7
6.1 APPLICATION
page 7
6.2 DESCRIPTION
page 7
6.3 INTENDED USE
page 7
6.4 UNEXPECTED USE
page 7
7. SPECIFICATIONS page 7
7.1 MOTOR SPECIFICATIONS
page 7
8. GENERAL INSTALLATION PRECAUTIONS page 8
8.1 MOTOR AND PUMP PAIRING
page 8
8.2 INSTALLATION
page 8
9. MOTOR CABLE EXTENSION page 8
10. ELECTRICAL CONNECTION page 9
10.1 GENERAL WARNINGS
page 9
10.2 MOTOR PROTECTION AND WIRING DIAGRAMS
page 9
11. OPERATION BASED ON FREQUENCY CONVERTER page 9
12. USE, STARTING AND RUNNING page 9
12.1 GENERAL WARNINGS
page 9
13. MAINTENANCE AND REPAIRS page 9
14. DISPOSAL page 9
1. INTRODUCTION
This instruction manual contains specific information on the motor you
have purchased.
Follow the provisions here in to get the optimal performance and correct
operation of the product. For any further information, inquire with your
nearest authorized dealer.
NO PART OF THESE ILLUSTRATIONS AND/OR TEXT MAY BE
REPRODUCED FOR ANY REASON.
The following symbols are used in this instruction booklet to make the
reader aware of possible risks:
WARNING!
Risk of damaging the pump or system
Risk of causing injury or damaging property
Electrical hazard
2. MANUFACTURER IDENTIFICATION DATA
2.1 MANUFACTURER DATA
EBARA Pumps Europe S.p.A.
Registered office:
Via Campo Sportivo, 30 - 38023 CLES (TN) ITALY
Telephone: 0463/660411 - Telefax: 0463/422782
3. GUARANTEE AND TECHNICAL ASSISTANCE
FAILURE TO OBSERVE THE INSTRUCTIONS GIVEN IN THIS
MANUAL AND WORK DONE ON THE PRODUCT BY ANYONE
OTHER THAN OUR SERVICE CENTRES VOID THE WARRANTY
AND RELIEVE THE MANUFACTURER OF ALL LIABILITY FOR
PERSONAL INJURY AND DAMAGE TO THE PRODUCT.
When you receive the product, make sure that the packaging has not
been damaged externally (breaks/large dents); if so, immediately report
the damage to the shipping agent. Remove the product from its
packaging and check it for shipping damage; report any such damage
to the retailer within 8 days of delivery. Check that the ratings on the
product’s nameplate match those of your order.
4. GENERAL SAFETY WARNINGS
Before using the product, you must be sure you can follow the
instructions given in this manual and apply them whenever is needed.
4.1 PREVENTIVE MEASURES TO BE TAKEN BY THE USER
The user must observe all local safety and accident
prevention regulations; he must also observe the
product’s specifications (see “TECHNICAL DATA”).
When repairing or servicing the product, shut off its
power supply to prevent the risk of accidental startup,
which can result in injury and damage.
Attempting to service, install or handle the product
while its electrical equipment is live can result in
serious and even fatal injury.
Low voltage electrical machines have rotating parts
and live dangerous parts and potential hot surfaces.
The user should not attempt on his own initiative
operations or interventions that are not allowed in
this manual.
4.2 IMPORTANT PROTECTIONS AND CAUTIONS
The manufacturer declines all liability in the event of
damages to objects and/or people caused by tamper-
ing with the product.
Each conductor or powered part is electrically
insulatedwith regards to earth. Carry out earth
connection according national applicable
regulations.
TO BE KEPT BY THE USER