CD100 OWNERS MANUAL
Drawing No. :- TPC112
Issue :-
1
Date :-
20/06/03
INTRODUCTION
Dehumidifiers remove moisture from the air that is circulating through the unit.
The resulting reduction of relative humidity helps prevent rust, rot, mould, mildew and
condensation within the room, or other enclosed spaces where the dehumidifier is used.
A dehumidifier consists of a motor-compressor unit, a refrigerant condenser, an air circulating
fan, a refrigerated surface, a means of collecting and disposing the condensed moisture and a
cabinet to house these components.
The fan draws air through the refrigerated surface and cools it below its dew point, removing
moisture which is collected and led away. The cool air then passes the hot condenser, where it is
reheated. With the addition of other radiated heat the air is discharged into the room at a higher
temperature but lower relative humidity than when the air entered the unit. Continuous
circulation of the room air through the dehumidifier unit gradually reduces the relative humidity
in the room.
The CD100 dehumidifier is a rugged reliable drying unit designed to operate effectively over a
broad range of temperature and humidity conditions. A powerful and reliable active hot gas
defrost system, controlled by an electronic timer, guarantees positive de-icing and thereby
optimising operation at low temperatures.
The unit incorporates a welded steel chassis and is finished in vinyl coated steel covers for
resilience to damage caused by rough handling.
