EAW UXA4406 series, Руководство по установке

Страница: 20 / 28

The Home Page
The Home Page presents an overview of the configuration of the device. It indicates the user-define Device
Name at the top, and shows the four
Input Channels . The top line shows the Input DSP channel (‘A’, ‘B’ etc), and
the name the user has given to this channel. The bottom line shows the physical input number, and a list of the
outputs which are routed from the input channel.
AES3 Inputs
In addition to the usual analog inputs, the Device can also accept AES3 digital inputs. When a DSP input channel
is assigned to an AES3 channel, the “AES3” indicator will illuminate.
There is no ‘standard’ for the relative gains between Analog and AES3 so depending on the levels delivered by
the audio source, it may be necessary to adjust the digital input gain trims to normalise them. It is possible to
adjust the gain of the AES3 input using the Input Trim AES3 Gain parameter. For example, to achieve 0dBFS =
+18dBu, set the AES3 trim to -2dB. To achieve 0dBFS = +24dBu, set the trim to +4dB.
This device will automatically lock onto any sample rate within the range 28kHz and 108kHz.
Device Name DSP Input
Outputs Assigned Physical Input
Input Name
20
UXA Series Owners Manual