EAW UXA4406 series, Руководство по установке

Страница: 13 / 28

UXA Series Owners Manual
13
Audio Connections
Input Connections
For each input channel there is a female XLR connector for analog inputs. There is also one female XLR for one
stream (two channels) of AES3 digital audio. Note that only two channels of AES3 digital audio are available. The
Dante permits more channels of Digital Audio inputs.
The HOT, or + connection should be made to pin 2 of the XLR connector.
The COLD, or - connection should be made to pin 3 of the XLR connector.
Pin 1 of the XLR connectors is internally connected to the chassis. The shield of the input cable should always be
connected Pin 1 of the XLR to ensure that EMC performance and regulations are met.
DynO (where applicable) & limiters
Dynamic Optimization, which maximizes the output of every passband. This tangibly
increases output over what would otherwise be possible.
Air Loss Pre-emphasis Filter
A distance, temperature and humidity-dependent air loss pre-emphasis filter
improves high frequency projection by correcting for expected air losses
for longer distances.
Easy Configuration
Just enter the loudspeaker model and amplifier you are using in the Greybox setup
window. Resolution automatically applies the Greybox settings and optimizes the
entire system in seconds.