EAW UXA4406 series, Руководство по установке

Страница: 19 / 28

19
UXA Series Owners Manual
Navigation
Parameter navigation and adjustment on the UXA Series is very straightforward. There is no concept of drilling
down deeper into hidden menus; every parameter is accessible by simply scrolling across a ‘map’ of parameter
pages which can be thought of as placed on a 2-dimensional grid. Horizontally across the width of the grid are
the various channels, and vertically up and down the grid are the parameter pages for each section
of processing.
To view a parameter, repeatedly press the desired
<INPUT>
or
<OUTPUT>
channel button until the desired
channel is reached. Then repeatedly press the up <  > and down <  > buttons to scroll through the processing
parameters for the selected input/output.
Two encoders allow you to select and adjust a parameter. Often, several parameters will be shown in various
zones on the display. To select a parameter for adjustment, turn the right-most encoder such that the parameter
you wish to adjust is highlighted. Then turn the leftmost encoder to adjust the value of that parameter. Turning
this encoder clockwise will increase the value of a parameter, or anticlockwise will decrease it. The encoders
are velocity-sensitive so turning an encoder rapidly will cause the action to ‘accelerate’, so the value changes
more rapidly.
Turn the SELECT encoder
to highlight the zone you
wish to adjust.
Turn the ADJUST
encoder to change
its value.