background image

Operation

7. Operation

Once all connections have been made and configuration 
options selected, UXA4403 amplifiers are ready for 
use. If an input signal above -60dB is present on any 

input, the front panel Input and  Standby indicators will 

illuminate green to indicate normal amplifier operation. 
Audio will be heard from any connected speakers.

Note: UXA4403amplifiers will not switch on from Standby Mode 
unless an input signal is present, a network ‘ON’ command is 
received, or an external standby switch (or 12V trigger) is operated. 
Standby behaviour can be  configured via the Power Management 
menu of the Settings Tab.

Amplifier outputs will mute if no input signal is present for 5 
minutes, and the amplifier will switch automatically to Standby 
Mode if no signal is present on any input for more than 15 
minutes. Alternative standby and mute delay times can selected 

via the 

Settings Tab

. Amplifier cooling fan speed is temperature 

controlled. The fan will switch off when the amplifier enters 
standby mode.

7.1 Front Panel Indicators

UXA4403 amplifier front panel indicators illuminate to indicate 
the following operational states:

Status:

 

Off – Mains power disconnected.

 

 

Green – Amplifier operational.

 

 

Pulse Green – Standby Mode.

 

 

Amber – GPIO triggered Standby Mode

Input:

 

 Off – No input signal present.

 

Green – Signal present on one or more inputs.

 

Amber – Signal limiting/clipping on one or more 
inputs.

Output:

   Off – No output signal present.

 

Green – Signal present on one or more outputs.

 

Amber – Signal limiting/clipping on one or more 
outputs.

 

Red – One or more channel pair is in 

 

overload/protection mode.

Network: 

Off – No Ethernet network detected.

 

 

Green – Ethernet network detected.

WiFi: 

Off – WiFi disabled.

 

 

Green – WiFi enabled.

 

7.2 Automatic Power Sharing

UXA4403 amplifiers incorporate a power sharing feature 
that automatically shares the total power available from the 
amplifier’s internal power supply across each pair of output 
channels. If one channel temporarily demands more than the 
amplifier’s continuous power rating while other channel is 
demanding less, the excess power available from the internal 
power supply is automatically made available to the over-
power channel. Power sharing optimises the amplifier’s ability 
to deliver maximum power into dynamic loudspeaker loads 
when playing music programme material.

7.3 Default Reset

UXA4403 amplifiers can be returned to their default settings 
via either the Control Web App Settings Tab or the hardware 
reset pinhole button. The reset pinhole button is located on the 
underside panel of the amplifier. 

To reset the amplifier using the pinhole button, follow the steps 
below:

 

• Disconnect the amplifier from mains power.

 

•  Use an appropriate tool to press and hold the reset 

pinhole button while simultaneously reconnecting mains 
power. 

 

•  Continue to hold the reset pinhole button for a few 

seconds as the amplifier restarts.

The amplifier will restart with all settings at their default state. 
Any previously configured settings will be deleted.

Содержание UXA4403

























Отзывы: