Technical and Safety Notices
Please read the following important technical, safety
and environmental notices before installing and using
your amplifier.
Technical Notices
All reasonable design and engineering steps have been taken
to ensure that these amplifiers always perform satisfactorily
in their intended application and environment and will provide
appropriate levels of support to ensure that all reasonable
customer needs and expectations are met. Such support
however is contingent on the following provisions.
1.
These amplifiers are Class-I products and should be installed
with a mains cable including the required earth connection to
comply with the Safety Class-I.
2.
These amplifiers should always be installed by competent
and qualified personnel. Amplifier damage or failure caused
by installation or operational errors may invalidate support,
warranty or guarantees of performance.
3.
These amplifiers are not suitable for use in locations where
they may be accessible to minors.
4.
These amplifiers are intended to be used specifically for the
amplification of audio signals and for connection to moving-coil
loudspeaker systems. Use of these amplifiers for amplification
of signals outside the audio band (20Hz to 20kHz) or to
drive transducers other than moving-coil loudspeakers may
invalidate support, warranty or guarantees of performance.
5.
These amplifiers should only be used within professionally
installed and configured audio systems comprising input
and output ancillary equipments that is known to be of an
appropriate level of performance and in good operating
condition. Any damage to, or unsatisfactory performance from,
these amplifiers caused by inadequate or failed input or output
ancillaries may invalidate support, warranty or guarantees of
performance.
6.
These amplifiers are intended to be installed and operated
indoor in a controlled environment (pollution degree, PD2)
within an ambient temperature range of 0°C to 40°C. These
amplifiers are not intended for use above 2000 meters above
sea level. Amplifiers installed or operated in environments
outside these limits may invalidate support, warranty or
guarantees of performance.
7.
Specific warranty terms are the responsibility of the amplifier
re-seller.
Safety and Environmental Notices
Note: The intent of the lightning flash with arrowhead symbol
in a triangle is to alert the user to the presence of uninsulated
“dangerous” voltage within the product’s enclosure that may be of
sufficient magnitude to constitute a risk of electric shock to humans.
Note: The intent of the exclamation point within an equilateral
triangle is to alert the user to the presence of important safety, and
operating and maintenance instructions in this manual.
WARNING! TO PREVENT FIRE OR ELECTRIC SHOCK,
DO NOT EXPOSE THIS EQUIPMENT TO RAIN OR
MOISTURE.
Ambient Temperature Note: If this equipment is
operated in a confined or multiple rack installation, the
internal ambient operating temperature may exceed
the external ambient temperature.
It is important to ensure in these
circumstances that the published
maximum operating temperature for the
equipment is not exceeded.
Reduced Air Flow: Ensure that rack or
other closed installation does not restrict
the cooling airflow required for safe and
reliable operation of the equipment.
Содержание UXA4403
Страница 1: ...UXA4403 User Manual...
