KF760 Series Rigging Procedures PRELIMINARY DRAFT -- 21 Aug 01
KF760 Series Rigging Procedures PRELIMINARY DRAFT -- 21 Aug 01 Page 29 of 29
1. Remove the front and rear connecting pins from the hinges between the top enclosure and the Fly-Bar
so the hinges drop into the enclosure s Hinge Tubes.
2. Reinsert the removed connecting pins into the holes on the Fly-Bar from which they were removed.
3. Fly out the Fly-Bar.
4. Push the pallet loaded with the four KF760s out of the way.
5. Lower the Fly-Bar to the deck and disconnect the chain motors from the Fly-Bar.
6. The Fly-bar can be left as is or dismantled for packing. To dismantle, remove the Tail Bar (if used)
from the Spreader and remove the Spreader from the Rigging Bars.
