24
Flybar Carabiner Kit
These instructions detail how to attach the Flybar Carabiner to your ADAPTive Anna system for proper
cable management and strain relief using the metal eyes attached to the cabling provided with your
ADAPTive System.
Note:
The images below are of the EAW ADAPTive Anna System and Flybar and carabiner mounting
point. Consult the Flybar Diagram in the User Manual provided with your EAW ADAPTive System for
the location of the corresponding point for your system.
WARNING: FAILURE TO FOLLOW MANUFACTURER’S INSTRUCTIONS MAY RESULT IN DAMAGE,
SERIOUS INJURY OR DEATH.
PREPARATION
a.
All power and signals going to the ADAPTive system must be
“OFF”.
b.
It is recommended that you remove all external
connections.
c.
It is recommended that you do not attempt this installation
while the system is suspended in air.
1.
Inventory of your kit
Your kit will include (1) Black 25mm Screw Lock Carabiner
2.
Locate Carabiner Mounting Point on Flybar
The mounting point for the carabiner is located on the left side
of the flybar if you are oriented at the back of the system.
3. Twist the screw-lock on the carabiner to allow the gate to open
4.
Hook the Carabiner through the mounting point
It is recommended that the wider portion of the carabiner eye
be section of the carabiner that is through the mounting point.
5. Place the eye of the metal strain-relief from the EAW
ADAPTive System’s network and power cabling through the
gate of the carabiner
5.
When all desired cabling is properly attached to the carabiner,
twist the screw-lock on the carabiner closed to lock the gate.
It is recommended the carabiner is securely locked closed to
prevent accidental disengagement.
Содержание ADAPTive systems
Страница 1: ...Accessory Rigging Guide...
