EauVation Acqua 80, Инструкция по эксплуатации

Страница: 21 / 30

Replacing the water outlet pipe with UVC lamp
19
10 Replacing the water outlet pipe with UVC lamp
For installation and removal see chapter 9.
11 Renewing the water bath

Close the water stop cock.

Depressurise the water pipe by pressing the button for still water.

Turn off the water dispenser.

Pull out the mains plug.

Hold the level indicator hose (1) in a bucket.

Completely empty the water bath.

Position the level indicator hose (1) upright and use a cable tie to
fix in place.

Insert the water
connection hose into the “FILL THE ICE-BANK”
connection.

Open the water stop cock.

Fill the water bath to a level between MIN and MAX.

Close the water stop cock.
 Insert the water connection hose into the “IN H
2
O” connection.
Before inserting the hoses, spray the end of the hose with
EAUVATION N° 2.

Unscrew the upper cover plate and remove it.

Using curved needle-nose pliers, add one tablet to prevent the
formation of algae to the water bath.

Screw the upper panel tight.

Plug in the mains plug.