Eaton xStorage 400, Инструкция по установке и эксплуатации

Страница: 17 / 96

Eaton xStorage 400 Installation and Operation Manual P-164001032—Rev 01 7
C Chhaapptteerr 33 IInnssttaallllaattiioonn P Pllaann aanndd U Unnppaacckkiinngg
33..11 IInnssttaallllaattiioonn P Pllaann aanndd U Unnppaacckkiinngg
Use the following basic sequence of steps to install the Eaton xStorage 400:
1. Create an installation plan for the xStorage 400.
2. Prepare your site for the xStorage 400.
3. Inspect and unpack the xStorage 400.
4. Unload and install the xStorage 400, and wire the system.
5. Have authorized service personnel install the batteries.
6. Complete the Installation Checklist.
7. Have authorized service personnel perform preliminary operational checks and start up the system.
33..11..11 C Crreeaattiinngg aann IInnssttaallllaattiioonn P Pllaann
Before installing the xStorage 400, read and understand how this manual applies to the system being installed.
Use the procedures and illustrations in paragraph
3.2 Preparing the Site and paragraphs
4.2 Unloading and Placement of the Eaton xStorage 400 through 4.6 Installing Interface Wiring Connections to
create a logical plan for installing the system.
33..22 P Prreeppaarriinngg tthhee S Siittee
33..22..11 EEnnvviirroonnm meennttaall C Coonnddiittiioonnss
The xStorage 400 is intended for outdoor installations only.
Make sure that the environment for the xStorage 400 meets the following operating restrictions:
• Outdoor temperatures as specified in paragraph 10.5 Environmental Specifications .
• The xStorage 400 shall not be installed in a location where it is exposed to floodwater.
• The xStorage 400 shall not be installed in a location where it is exposed to saltwater spray or marine
environment.
33..22..22 IInnssttaallllaattiioonn C Coonnssiiddeerraattiioonnss
The xStorage 400 must be installed on a level concrete pad suitable for the weight of the system.
The xStorage 400 installation site must meet the maximum weight requirements shown in Table 1 and the size
requirements shown in Figure 2 through Figure 5 . Dimensions are in millimeters (inches).
The xStorage 400 has not been tested for exposure to seismic activity.
Table 1. Cabinet Weights
Model
Weight kg (lb)
Shipping
Installed
Eaton xStorage 400
2722 (6000) 4627 (10200)
NOTE Installed cabinet weight includes weight of installed batteries.