Eaton XP-503-10-A10-A01-1B, Руководство пользователя

Страница: 53 / 75

5 Commissioning and operation
5.7 Operating system XP-503 with Windows 10 Enterprise LTSC
XP-503 04/2020 MN048014 EN Eaton.com
53
5.7.3 Managing Accounts and Auto Logon functionality
Managing Accounts
There is an “XP503” user account with administration rights set up on your Eaton XP-503 unit when
shipped from the factory. During initial power on, the user has to enter a new password for this
account. After the change, the Windows "Restart" function must be performed. Shutting down the
XP503 and then perform a normal Power on is not sufficient!
CAUTION
Data loss
A power interruption on reboot may cause the XP-503 to not start properly anymore.
In this case, contact the support.
Modifying an Account Name or Password
You can modify the user account settings or create any other account from the “User Accounts” utility
in “Control Panel” (Start->Windows System->Control Panel->User Accounts).
Once changes have been done to the user settings and the “direct device start” feature has been
setup before, you have to modify the related registry settings following the advise in section “Direct
device start”.

All changes made to the C:\ drive when Protect Mode is active must be
saved or committed so that the next time the XP-503 is restarted the
changes will be retained. Refer to the “Protect Mode” section for additional
information.
5.7.4 Direct device start
The following adjustments decline the protection of the system from damage. Please check the
changed configurations for your application and please secure the system with other suitable security
activities.
You can activate a direct device start (without entering username and password) if you add enries to
the Windows registry. The needed procedure is described on Support.microsoft.com/en-us . Search
for “How-to-turn-on-automatic-logon-in-windows”.