Eaton XP-503-10-A10-A01-1B, Руководство пользователя

Страница: 52 / 75

5 Commissioning and operation
5.7 Operating system XP-503 with Windows 10 Enterprise LTSC
52
XP-503 04/2020 MN048014 EN Eaton.com
Protect-Mode data organization
C:\ drive

Protected by Protect Mode when enabled
Files to be installed and changed only at initial device setup and should remain unchanged under
normal operation.
Other drives (such as D:\)

Not protected, even when Protect Mode is enabled
Files to be stored through normal operations: process data, trends, recipes, alarm lists, ...

If Protect Mode is active and extensive changes are made to the C:\ drive (e.g.
software installations), volatile memory may become full resulting in system errors.
Enabling Protect Mode
In the delivery state, the Protect Mode is deactivated. During first setup of XP, all needed changes
should be made to drive C: , (Change of default password, installation of required software, change of
settings ...), the Protect mode should be activated.
For this please start the Protect Mode Manager under Windows " Start

Eaton

Protect Mode
Manager",select the "Advanced" tab and press the "Enable Protect Mode" button.
This will force a reboot and return the XP-503 unit to its normal protected state.
Disabling Protect Mode
The protection feature can be disabled for software program that is very large or one that requires
multiple reboots to complete its installation.
To do so, open Protect Mode Manager by selecting “Start

Eaton

Protect Mode Manager”. From
the Protect Mode Manager window select the “Advanced” tab and click on the “Disable Protect Mode”
button.
The system will then reboot. After the restart is the Protect mode inactive. Upon reboot Protect Mode
will be disabled and while in this mode the XP unit will behave like any other Windows PC, meaning
that it is subject to all forms of malware including viruses, and adware and it must be shut down
through the normal Windows shutdown mechanism to prevent potential corruption of the operating
system.
It is recommended that the XP-503 unit be removed from any plant network while Protect Mode is
disabled and that all media used for software installation to be connected to the unit are scanned for
malware prior to attachment.

We recommend operating the device always with protect mode activated.