Eaton XP-503-10-A10-A01-1B, Руководство пользователя

Страница: 32 / 75

5 Commissioning and operation
5.1 Adding expansions to the XP-503
32
XP-503 04/2020 MN048014 EN Eaton.com
5 Commissioning and operation
5.1 Adding expansions to the XP-503
5.1.1 General prerequisites
Limitation of Liability
All technical data, certifications, and approvals will cease to apply/be void if expansions other than
those approved by Eaton are used.
We will not assume liability for functional limitations resulting from the use of third-party devices and
components.
CAUTION
All cards and assembly parts are electrostatic-sensitive.
Follow all ESD safety instructions.
The symbol to the left is used to indicate the use of electrostatic-sensitive
components.
Precautions
CAUTION
Electronic assembly parts are extremely sensitive to electrostatic discharges.
Because of this, it is necessary to take precautions whenever handling the cards.
Please refer to the guidelines for electrostatic-sensitive components for more
information (ESD guidelines).

Before plugging in or disconnecting components or expansion modules,
disconnect the XP-503 from the power supply.

Before plugging in the cables, you will need to bring the static charge on your body
to the same potential as the charge on the XP-503 and the cables.
To do this, briefly touch the metal housing.

Discharge the electrostatic charge on your tools.

Wear an anti-static wrist strap when handling components.

Leave components and expansion modules in their packaging until
right before you install them.

Grab components and expansion modules from the edge only –
do not touch connection pins or traces.

Never run the XP-503 with the housing open.
CAUTION
Please note:
Only service personnel should be allowed to open the XP-503.