5
Installation
InstructIon manual
MN050011EN August 2022 www.eaton.com
Step 3. Make sure that the device is de-energized.
Step 4. Pull connector X6 out from the female connector at
the top in order to disconnect the device from the
power supply.
Figure 9 . Disconnecting the device from the
power supply
Connection terminals
Plug connector
X6: The required plug connector with push-in spring-cage
terminals FMC 1.5/4-ST-3.5 is included as standard with
the XN-332-5ETH-UMS. To use them, the conductor simply
needs to be slid into the appropriate contact.
In order to release the conductor, simply press on the
release mechanism, e.g., with a screwdriver, to pull out the
conductor from the corresponding contact.
Table 2 . Connection specifications
cable cross-sectional areas
Xn-332-…
0.39 inch (10 mm)
Solid
mm
2
0.2–1.5
0.39 inch (10 mm)
Flexible with uninsulated ferrule mm
2
0.2–1.5
0.39 inch (10 mm)
Flexible with insulated ferrule
mm
2
0.2–0.75
Ferrule d
mm
≤ 2.8
AWG
24–16
Strip length
mm
10
Figure 10 . Ferrule with d2 = Maximum 2 .8 mm
NOTICE
THE SPRING-CAGE TERMINALS CAN BE USED TO CONNECT
ULTRASONICALLY SPLICED (ULTRASONICALLY WELDED) WIRES.
4
RN
DC
LA
X1
FD
LA
X2
FD
LA
X3
FD
LA
X4
FD
LA
X5
FD
d
Ød
