Eaton XH-303, Руководство пользователя

Страница: 71 / 94

7. Make Connection
7.2 Using the Web Config Tool
7.2 Using the Web Config Tool
Direct connection between the easyE4 and the XH-303 HMI Web Panel
If the Ethernet connection is routed out of the building at one point, a network isol-
ator (switch) must be used without fail for the connection to the XH-303.
Prerequisites
l
One standard RJ45 Ethernet cable (not included)
l
Existing separate power supply for:
- easyE4
- XH-303
DEL
ALT
ESC
OK
Fig. 36: Ethernet connection using the ports on the XH-303 and easyE4
easyE4 connection with the XH-303 through an Ethernet switch
If you want to connect more than one easyE4 base device or more than one network
station to the XH-303, a properly sized Ethernet switch must be placed in between.
Prerequisites
l
Standard Ethernet switch with at least two ports (not included)
l
Two standard RJ45 Ethernet cables (not included)
l
Existing separate power supply for:
- easyE4
- XH-303
- Ethernet-Switch
RN
DC
LA
X1
FD
LA
X2
FD
LA
X3
FD
LA
DEL
ALT
ESC
OK
Fig. 37: Ethernet connection between the XH-303 and easyE4 devices through an Ethernet switch
71
XH-303 09/22 MN048029EN Eaton.com