Eaton XanuraHome RFIX35, Руководство пользователя

Страница: 54 / 64

54 MBO 6012349G01 001
Installation methods (cont'd.)
• If the mains lead supplied is used, the wire ends must be
installed up to the insulation in the connector. There must not
be any bare copper visible.
• Ensure that the built-in antenna is at a sufficient distance from
metal parts and cabling.
• Never install the RFIX35 against a metal rear wall.
• Install the RFIX35 at a sufficient distance from other
RF transmitters, such as WIFI routers and DECT telephones
etc. This equipment can interfere with the reception of the
RFIX35. Install the RFIX35 at least 1.5 metres from such
equipment, as centrally as possible in the home (in electrical
terms).
• To prevent short circuits, this product should only be used
inside and only in dry spaces. Do not expose the components
to rain or moisture. Do not use the product close to a bath,
swimming pool etc.
• Do not expose the components of your systems to extremely
high temperatures or bright light sources.
• Only connect the product to the mains after checking
whether the mains voltage is the same as the values on the
identification tags. Never connect a power cord when it is
damaged. In that case, please contact your supplier.