Eaton XanuraHome RFIX35, Руководство пользователя

Страница: 50 / 64

50 MBO 6012349G01 001
Programming the RFIX35 (cont'd.)
accept any remote control. The LED of the RFIX35 will be lit for
2 sec. and will return to the normal operation mode without
storing the remote control. If you accidentally link a remote
control that was already linked it will be accepted without
"claiming" any extra memory space.
Note: If the same remote control is linked with a
new random generated security code, extra memory
space will be claimed.
The RFIX35 will automatically return to the operation mode when
it does not receive any commands within 60 seconds.
Delete all linked remote controls from memory
If you have already linked 8 remote controls and want to link a new
remote control to the RFIX35, you will first have to clear the
memory of the RFIX35. This is possible by first setting the RFIX35
in the RF-secured programming mode (keep programming switch
pressed and release the switch after 6 seconds. The LED will give
quick short blinks). In the RF-secured mode press the programming
switch and keep it pressed. Release the programming switch after
9 seconds. All previously linked remote controls are now deleted,
the memory is cleared. You can now start the procedure as
previously described to link up to 8 remote controls again.
3
!