9
EATON
IB053008EN
Installation instructions
WaveLinx Wireless Area Controller (WAC)
●
●
Using the WAC internal web page,
●
●
Change the default name of the WAC
●
●
Statically assigning the IP address of the WAC
2. Wireless Connection - Building Wireless connection
●
●
WAC device name will be: Eaton-xxxxxxxxxxxx
●
●
(where **** are all twelve characters of the unit MAC address found on the label at the bottom front of the WAC
plus 1)
●
●
Using the WAC internal web page,
●
●
Enter the building wireless login credentials.
●
●
Building wireless login credentials are secured in the WAC by secure web pages and encryption during
storage.
●
●
Change the default name of the WAC
●
●
Statically assigning the IP address of the WAC
THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES. OPERATION IS SUBJECT TO THE FOLLOWING TWO
CONDITIONS:
1. THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE
2. THIS DEVICE MUST ACCEPT
This device complies with Industry Canada™s licence-exempt RSSs. Operation is subject to the following two conditions:
1. This device may not cause interference; and
2. This device must accept any interference, including interference that may cause undesired operation of the device.
Le présent appareil est conforme aux CNR d™Industrie Canada applicables aux appareils radio exempts de licence.
L™exploitation est
Autorisée aux deux conditions suivantes:
1. l™appareil ne doit pas produire de brouillage, et
2. l™utilisateur de l™appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d™en
compromettre le fonctionnement.
To maintain compliance with the RF exposure guidelines, place the unit at least 20cm from nearby persons.
Pour assurer la conformité aux directives relatives à l’exposition aux frequencies radio, le jouet doit êtreplacé à au moins
20_cm des personnes à proximité.
Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority
to operate this equipment.
