10
Technical Data
PR211-183-505-01
VoCALL CFVCCM9 compact master
EATON
www.eaton.com
Battery Test
This menu option performs a battery test when requested. The
menu shows the current state of the PSU and the battery. Both
the battery present test and the battery high impedance test are
performed automatically (every 15 seconds, and every 3 hours
respectively). However, this menu allows both battery tests to be
performed on demand. Typically this is performed when the batter-
ies have just been added or changed.
Battery test
Mains: OK
Batt : OK
Action>Quit
Press up or down to toggle between Quit and Retest. Press TICK
to select that action.
Define outstation
This menu option will set all outstations to present. This does
not permanently save all outstations as present. This is used for
testing purposes only.
Define all handsets
Master>No
Slave:No
:Next
Outstation Ring
This menu option will cause all outstations to ring, for single
engineer testing of a system. When an outstation is picked up it is
recorded in the call log.
Define all handsets
Master>Start
Slave:No
:Next
Test indicators
This menu will sound the buzzer, and will flash all panel LEDs,
except for the green power LED.
Test indicators
>Quit
Outstation settings
Scroll to the Outstn settings menu and press TICK. This menu
consists of a list of all 20 possible lines (M1 through M9 on the
CFVCCM9 master unit, and S1 through S10 on the CFVCCS10
slave unit, plus a back option. The outstation location is shown
with the outstation line number, along with a symbol:
Select outstation
ø
S10-outstation 10
> Back
M9-Outstation 1
Unlocked:
this outstation exists.
ø
Line through circle: this outstation does not exist
or is in fault.
Select the outstation to be configured and press TICK.
This shows a sub menu for each outstation
ø
M9-outstation 1
Back
>Settings
Name
Settings
ø
M9-outstation 1
O’stn not detected
Kind>None
:Next
The second line of the display indicates the status of the exten-
sion (present or not detected).
Kind allows you to set the outstation type:
None (no outstation),
Phone (Type A handset),
Refuge (Type B handsfree handset),
Pullcord (disabled toilet alarm).
If an outstation is defined as a Pullcord, the master will emit a
continuous tone if the toilet alarm is activated. This tone will
cease when the master handset goes off hook. No call can be
established with the toilet alarm.
Set name
ø
M9-outstation 1
Name
>Extension 1 <
:Next
Use the navigation keys to change the first character of the
extension name, and press TICK to move to the next character.
Repeat for all characters. Press TICK on the last character to move
the cursor onto Next.
Use navigation keys to select Next, Save, or Quit, and press
TICK to select option.
Note: if the memory is protected (locked padlock symbol
shown for the exchange), then you will only be able to view this
information.
The cursor will be on the Quit option. Only Next and Quit
can be selected. Pressing Quit will move back to the select
outstation menu.
Network settings*
The Network Settings for the VocALL CFVCCM9 Compact are only
to be used for systems with the VOIP interface attached. These
setting are not required for adding the CFVCCS10 slave unit.
Press TICK
Network
Back
>Settings
Supervisor present
Master present
Outstations
