4
Section I – Introduction
A. Purpose Of Manual
This manual has been prepared to assist the users of
Vickers CM2 and CM3 series -20/-30 Design Multiple Unit
Valves in properly maintaining and repairing their units. In
the sections which follow, the multiple unit valves are
described in detail, their theory of operation is discussed
and instructions are given for their proper installation,
maintenance and overhaul.
B. General Information
1. Related Publications - Service parts information
and installation dimensions are not contained in this
manual. The parts catalogs and installation drawings
listed in Table 1 are available from your local Vickers
Mobile Division application engineering office, or from:
Vickers
Mobile Hydraulics Division
P.O. Box 302,Troy, Michigan 48084
Attn: Mobile Service Department
Model Series
Parts Catalogs
CM2-20
CM2-30
CM3-20
CM3-30
Table 1.
Installation
Drawings
M-2401-S
M-2403-S
M-2402-S
M-2404-S
M-259218
M-259219
2. Model Codes - Variations within each basic model
series are covered in the model code. Table 2 shows a
complete breakdown of the model codes covering these
units. Service inquiries should always include the complete
model code number as stamped on the valve bodies.
