Installation
S801+ Soft Starter
MN03900002E—November 2012
www.eaton.com
13
Lug Installation, S801+N… and S801+R…
Wire the appropriate line and load conductors to the Soft
starter in accordance with federal and local codes. Torque
fasteners per table on
Page 11
.
Lug Installation, S801+T…, S801+U…, and
S801+V… Frames
1.
Remove line and load terminal lug covers by removing
the screws that hold each cover onto the soft starter.
2.
With screws removed, slide the covers off the unit.
3.
Position lugs and install lug mounting hardware
according to the instructions included in the kit. Tighten
lug mounting hardware included in the kit to 120 Lb-in
(13.6 Nm).
4.
Install line and load conductors and torque hardware in
accordance with table on
Page 11
.
5.
Slide the line and load lug covers back into their original
positions.
6.
Secure with the screws previously removed.
S801+V… Shown with Terminal Cover Removed and
EML30 Lug Kit Installed on Load Side
Control Wiring Inputs
Control wiring is connected to the S801+ by one (1) terminal
block and one (1) RJ12 connection located at the front of
the unit.
Control Terminal Block—A 12 position connector is utilized to
make connections for 24 Vdc control power, soft starter
control function commands, and Auxiliary Relay functions.
A 3 position screw connector utilized to make connections
for factory use only and is not utilized with S801+ operations.
User Interface Module Terminal Block—An RJ12 connection
utilized to make the connection to the Control Interface
Module (CIM).
Control Terminal Block
DIP Switch
Switch S1 selects Edge (ON) or Level (OFF) sense detection
on the Run1 input on control block Terminal 1 (default).
Switch S2 is not functional on the S801+.
Switches 32–1 are not functional on the S801+.
DIP Switch
Additional information on Level and Edge Sensing may be
found in Functional Description starting on
Page 23
.
1
2
4
8
16
32
S2
S1
On
Содержание S801+ Series
