Eaton RMD, Инструкция по установке и эксплуатации

Страница: 14 / 20

Operation
10 Eaton 93PM Remote Monitoring Device (RMD) Installation and Operation Manual P-164000516—Rev 1
On Bypass Screen – When the UPS is on bypass, the status indicators and information area will be displayed
as shown in Figure 9. The critical load is supported by the bypass source.
Figure 9. On Bypass Screen
Fault Condition Screen – When a fault condition occurs the status indicators and information area will be
displayed as shown in Figure 10 and indicates the UPS has an active alarm and requires immediate attention.
If this occurs, check the state of the UPS and if necessary contact service as the UPS may not be able to provide
backup power.
All alarms are accompanied by an audible signal. To silence the audible signal, press the power button
momentarily (see Figure 4). The Alarm status indicator may be illuminated along with other indicators.
Figure 10. Fault Condition Screen