Eaton - Lighting Systems iLight Product Series - RI-2 73-897-00 IM8791 Iss 5 10
Service Switches and LEDs
These switches and LEDs are located at the base of the unit.
The two service switches on the source controllers are used for the following:
•
Entering Diagnostic Mode.
•
Putting the Source Controller in
override mode.
•
Sending a message to identify
the device on the network.
•
Sending a message to identify
the device on the network.
The LEDs indicate the following:
•
Normal operation:
Steady green LED blinking 1 x
per second.
Red LED off.
•
Message transmission and
receipt indicated by red LED
flashing for duration of data
transmission.
•
Override status: Both LEDs
flashing together or just red
flashing and green off.
ICANnet error status will occur when
a Source Controller is not connected
to an iCAN network for any reason.
Once either connected to a network
of one or more other devices which
are powered the error status will
be removed. It is still possible to
enter Diagnostic mode if a Source
Controller is in iCANnet error status.
Содержание RI-2
Страница 1: ...RI 2 Relay Interface Installation guide ...