31
3.1
CE symbol
We hereby declare this product is in compliance with the Essential Health and Safety
Requirements of
EMC Directive 2014/30/EU,
Low Voltage Directive 2014/35/EU and
RoHS Directive 2011/65/EU.
The appropriate standards, technical regulations und specifications you can take from the
attached conformity declaration and the conformity declarations on our Website
3.2
Use in marine and offshore segments
The telephone ResistTel IP2 is certified by DNV-GL for use in the marine and offshore
sector acc. to IEC 60945 and DNVGL-CG-0339. The device is classified as follow:
Certificate No.
Temperature
Humidity
Vibration
EMC
Enclosure
TA00000RT
D
B
A
B
C
The following save distances must be observed:
to the Standard-Magnetic-compass
1,10 m (reduced 0,55 m)
to the Steering-Magnetic-compass
0,70 m (reduced 0,35 m)
For the operation on the bridge of the ship, the maximum prescribed ringer volume
of 75-85 dB(A) must not be exceeded. Therefore the factory settings of the
telephone must be adjusted.
On the web interface of the telephone at Phone/User-x/Preferences with x=1…6 the
ringing tones of all call types (Internal Calls, External Calls, Returned Calls, Offered Calls,
Announcement Calls, Multicast Announcement Calls, Messages, Do not Disturb and, if
activated, ring filter) for all used registrations have to be limited to the volume
5
of the
default melody (3tone1) and the default speed (5).
With the user interface of the telephone the ring tones of the call types (Internal Calls,
External Calls, Returned Calls und Message) can be limited to the same setups.
Furthermore you have to pay attention, that during an active incoming call the volume,
will not be increased with the volume keys of the telephone above the allowed step
5
.