23
b.
Press the loudspeaker key (hands free mode).
c.
Press the headset key (Key long (longer than a second) and then the
loudspeaker key ) (headset mode).
d.
Press the key or key (short or long). With a configured headset you
will reach the headset mode otherwise the hands free mode.
e.
Using the key (short or long) executes the selection immediately. Using
the key , however, executes the selection only if the cursor is situated to
the right of the last entered digit.
5.
When using block dialling, you may enter further properties of the selection. Do so by
pressing the key. See chapter 2.3.3.2.1 on page 23.
2.3.3.2.1
Menu Parameter Input Indirect Dialling
The following is displayed:
Call as User..................
Save no. in Directory
Send Message
Dial..........................
Number Present.: On
Indirect dialling
Figure 17: Menu Parameter Input Indirect Dialling
If you use the cursor keys to select the menu item Call as User and then press the
key , the menu User List appears (see manual). Now the User can be changed
prior to dialling. The change affects the current call only.
If you use the cursor keys to select the menu item Save no. in Directory and then
press the key , the menu Directory Input appears (see manual). Here the entry
may be edited and used in the telephone book.
If you use the cursor keys to select the menu item Dial and then press the key ,
the current telephone number is dialled immediately.
If you use the cursor keys to select the menu item Number Present. and then
press the key , the number presentation is switched. The change affects the
current call only.
If you press the key
(long), the current telephone number is dialled
immediately, regardless of the menu item currently selected.
With Number Presentation On/Off you can select, weather the own calling number
or name will be displayed at the called subscriber.
