Eaton QSNAP, Инструкция по установке и эксплуатации

Страница: 7 / 30

Intelligent Technologies ( IT. ) QSNAP
Pub. No. MN05001001E 3
February 2002
Safety
The following safety statements relate to the installation, setup and operation of Eaton’s
Cutler-Hammer
IT. QSNAP and Starter.
Notice
Make sure you read and understand the installation procedures in
this manual
before you attempt to operate or set up the equipment.
WARNING
This instruction manual should be used for proper installation,
setup and operation of the
IT. QSNAP. Improperly installing and
maintaining this product can result in serious personal injury or
property damage. Before attempting installation, setup or
operation, read and understand this entire manual.
WARNING
Hazardous voltage can cause electric shock and burns. Always
disconnect power before proceeding with any work on this product.
CAUTION
Only apply 24V DC to the QSNAP power terminals. Use of any other
voltage may result in personal injury, property damage and
damage to the
IT. QSNAP.
WARNING
To provide continued protection against fire or shock hazard, the
complete
IT. QSNAP must be replaced if it becomes inoperative.