![background image](http://html1.mh-extra.com/html/eaton/pxgms-power-xpert-gateway-minislot-ups/pxgms-power-xpert-gateway-minislot-ups_quick-start-instructions_524577008.webp)
6
Eaton PXGMS Card Quick Start Instructions P-164000208—Rev 2
3.
Connect an active Ethernet cable (not supplied) to the Ethernet 10/100
connector on the PXGMS card (see Figure 4).
Figure 4. Install the Ethernet Cable
4.
Wait for the power light and status light on the installed card to illuminate.
This takes about two minutes.
5.
Open a Web browser and type the default IP address (
192.168.200.101
).
6.
Did the Power Xpert Gateway software open to the PXGMS page?
l
If yes, the driver has already been installed automatically. Either verify the
IP address assigned through DHCP or manually enter a static (fixed) IP
address for the card’s network connection:
a.To verify the DHCP-assigned IP address, go to page 13.
b.To manually enter a fixed IP address, go to page 16.
l
If no, the driver has not been installed. Go to the next section, "Install the
USB Driver Software" on page 7 in order to confirm that you have the most
current USB Driver software. If not, you need to install or update the USB
Driver software.
Ident
Power
Act
100
PXGMS UPS
Restart
TX
RX
Setup
CMN
Status
DHCP
EMP
Ethernet 10/100
+
-
Содержание PXGMS Power Xpert Gateway Minislot UPS
Страница 25: ......
Страница 26: ...164950239 P 164000208 2 ...