![background image](http://html1.mh-extra.com/html/eaton/pxgms-power-xpert-gateway-minislot-ups/pxgms-power-xpert-gateway-minislot-ups_quick-start-instructions_524577007.webp)
Eaton PXGMS Card Quick Start Instructions P-164000208—Rev 2
5
Section 3
Connect the Card to the Computer
To connect the card to the computer:
1.
Plug the small connector at the end of the supplied USB configuration cable
into the setup port on the card (see Figure 3).
Figure 3. Install the USB Cable
2.
Plug the other end of the USB cable into the USB port on the computer. The
Windows operating system detects new hardware.
Note:
If a message indicates that the device driver software was not
successfully installed, click
Ignore
.
Note:
You may see a pop-up message window that shows “Found new
hardware.” This indicates that the hardware installed successfully.
Ident
Power
Act
100
PXGMS UPS
Restart
TX
RX
Setup
CMN
Status
DHCP
EMP
Ethernet 10/100
+
-
Содержание PXGMS Power Xpert Gateway Minislot UPS
Страница 25: ......
Страница 26: ...164950239 P 164000208 2 ...