Eaton PXGMS Power Xpert Gateway Minislot UPS, Быстрый старт

Страница: 22 / 26

20 Eaton PXGMS Card Quick Start Instructions P-164000208—Rev 2
Section 8 Register a PredictPulse Subscription
PredictPulse is a remote monitoring and management subscription service that
collects and analyzes data from connected power infrastructure devices,
providing Eaton with the insight needed to make recommendations and take
action on your behalf. This service has limited availability outside of the United
States. For more information go to
www.eaton.com/predictpulse .
Note: Contact your Eaton service representative for availability of PredictPulse
in your region.
Use either the universal PredictPulse Subscription Wizard or the PXGMS
PredictPulse setup feature to configure your profile and register the Eaton UPS
devices monitored by PredictPulse.
The universal PredictPulse Wizard can be downloaded from the PredictPulse web
site to begin your subscription registration. Using this method, you can register
devices individually or as a group.
However, the latest firmware for the PXGMS and PXGX UPS cards contain a
PredictPulse activation set-up feature. As long as these cards are on your
network, you can quickly activate subscriptions without the wizard and save time.
To begin registering with the set-up feature, follow this procedure. An e-mail with
additional instructions to finish registering and configuring your card is
automatically sent to the provided e-mail address.
To register an installed PXGMS card for PredictPulse:
1. Locate the PredictPulse selection under the Configuration menu on the
Power Xpert Gateway window.
Note: If there isn't a PredictPulse selection, either update your firmware or
download the universal PredictPulse Wizard from
www.eaton.com/predictpulse and follow the instructions in the
Wizard and subsequent e-mail messages.
Note: Refer to the Eaton Power Xpert Gateway Minislot (PXGMS) User’s
Guide for more information.