Eaton PVM018 Скачать руководство пользователя

Страница: 42 / 48

EATON

PVM Piston Pump Service Manual E-PUIO-II001-E4 December 2017

Assembly must be conducted in a clean environment.

Dispose of leakage oil and oily cloths in an environmentally

responsible manner. Before assembly process can begin, all

parts have to be initially demagnetized and carefully clean

all parts and blow out holes with compressed air. Tighten all

screws plugs to the specified torque (see Appendix). Excep-

tions are specified in the text. Lubricate O-rings and shaft

sealing rings lightly with acid free lubricant for easier installa-

tion and to hold the O-ring in place in its groove or cavity.

1. Assembly of the Rotating Group

2. Control Sleeve and Control Piston

Note: Extreme care should be taken when installing the major and minor

diameter O-rings and backup-rings. The minor OD seals are installed in

reverse order to the major OD seals.

3. The Control Sleeve and Piston Sub-assembly to the
Swash Plate

For fixed hold down assemblies (57cc to 141cc):

• Place the swash plate with the control piston/sleeve

attached face down on the rotating group shoe faces.

Invert the swash plate and rotating group, install the

spacers, spacer limiter plates (bronze side towards the

spacers) and retaining screws.

Note: Torque the retaining screws to the specified torque

For Spherical Hold down Assemblies (18cc and 45cc):
• Install the pin into the seat with the pin partially coming out

of the flat part of the seat. Set the flat side of the seat

against the swash plate and press the pin through the seat

into the swash plate.

Note: The pin should be pressed flush or slightly below flush the surface of

the seat. A roll pin punch or a pin setter can be used to properly position the

pin into the spherical seat.

Assembly

Содержание PVM018

















































Результаты поиска

Содержание PVM018

Отзывы:

Похожие инструкции для PVM018

Бренды по названию

Популярные бренды

Eaton PVM018, Руководство по обслуживанию

Результаты поиска

Содержание PVM018

Отзывы:

Похожие инструкции для PVM018

Бренды по названию

Популярные бренды