Eaton Corporation Page 30 Ver 1.1
F. Super RS485 Card
The RS485 interface card is located in the right-hand side position of the
wiring box and integrated and shipped with the PV Inverter.
Figure 6.2.4: Integrated RS485 Interface Card
A) Link LED Indicator:
When an Ethernet cable is inserted in any RJ-45
port; the Link LED will light up in yellow color
and blink at 2Hz during signal transferring.
B) Power LED indicator:
It indicates the connectivity of Super 485 card
and it will be lit-up
in green when the inverter is
active.
C) TRX LED indicator:
It indicates when the firmware is uploading from
Ez Logger Lite to Super RS485 card. It will be
lit-up in red and blink at 2Hz during signal
transferring.
SW1: A Terminating
Resistor DIP switch
SW2: Communication
Model DIP switch
Terminating Block
2
nd
PoE RJ45 Port
1
st
PoE RJ45 Port
TRX LED
Power LED
Update LED
Link LED
