![background image](http://html1.mh-extra.com/html/eaton/powerxl-dx-net-ethercat-2/powerxl-dx-net-ethercat-2_manual_524574031.webp)
4 Commissioning
4.5 Engineering the module
DX-NET-ETHERCAT-2
01/14 MN040009EN
www.eaton.com
27
4.5 Engineering the module
The following instructions explain how to configure the communication
module with a DA1 variable frequency drive.
Figure 16:RJ45 plug connection
▶
Connect the device to the EtherCAT environment.
You will need the following components to do so:
•
Head-end controller
•
Computer (for programming and configuration purposes)
•
Variable frequency drive DA1 with DX-NET-ETHERCAT-2 connection
Figure 17:Engineering
a
PC (with configuration tool)
b
Head-end controller (master) with EtherCAT interface
c
EtherCAT cable
d
Variable frequency drive DA1 with DX-NET-ETHERCAT-2 connection
COM
ERR
RUN
③
①
②
④
L1/L L2/N L3
DC-
U
DC+ BR
1 2 3 4 5 6 7 8 9 10 11 12 13
14 15 16 17 18
COM
V
W
Содержание PowerXL DX-NET-ETHERCAT-2
Страница 4: ...II ...
Страница 20: ...2 Engineering 2 2 LED indicators 16 DX NET ETHERCAT 2 01 14 MN040009EN www eaton com ...
Страница 28: ...3 Installation 3 7 Install field bus 24 DX NET ETHERCAT 2 01 14 MN040009EN www eaton com ...
Страница 54: ...4 Commissioning 4 12 CoE communication objects 50 DX NET ETHERCAT 2 01 14 MN040009EN www eaton com ...