MANUAL FOR
BMS GrabBee II
USB VIDEO ADAPTER
The BMS GrabBee II is a Bridge between
personal computer and Video camera.
The high quality guarantees a perfect image
transfer without quality loss.
1: Scope of delivery
( For numbers see photo at the
last page )
1) USB Adapter with USB cable and S-
Video and Cinch Video input
2) USB Connector
3) S-Video Connector (input)
4) Cinch Video Connector (input)
5)
CD-ROM with software and driver (not in photo)
2: installation
Take the BMS GrabBee out of the box and put the USB cable into the USB-port from
computer. The system will automatically detect the BMS GrabBee and try to install
the driver. The driver is located at the delivered CD-ROM under
E:
\
GrabBee2
\
driver
(Where
E:
is the CD-ROM drive).
During installation you may be prompted for the following Windows files:
Ksclockf.ax
look under
windows
\
system
Ks.sys
look under
windows
\
system32
\
drivers
If these files are not installed at your system, please check for the files at your
Windows installation CD-ROM.
You can now install the GrabBee program or install the PhotoLib program instead
(See part 4). Place the installation CD-ROM in the CD-ROM drive and click ‘Start’.
Then click ‘Run’ and type the following:
E:\GrabBee2\AP Software\setup.exe
(Where
E:
is the CD-ROM drive).
Now follow the instructions on the screen, this will start the GrabBee software
installation.
Now you can start the program (A ‘
GrabBee USB Video Grabber
’ icon is located at
your desktop)
