PXL Series Installation
and Operation Manual
Instruction Manual
Page 6 Effective: January 2006
2.8 Ordering Guidelines
Table 4. PXL Ordering Guidelines
Catalog #
PXLXXXYYYYZK
XXX
YYYY
Z
K
Surge Rating
(kA)
Voltage
Configuration
Display Option
PXL
100
120
160
200
250
300
400
500
208Y
240D
240S
480Y
480D
S – Standard Monitor
P – Premium Monitor
NEMA 1,
3R
enclosure
Catalog Number
Description
PXL100208YSK
PowerWare PXL, 100kA 208Y Standard Monitor, NEMA 1,3R Enclosure.
Section 3 Operating Features
3.1 Internal Fusing and Status
Indicator Lights
The SPD is a passive device and does
not require regular servicing. To keep you
informed of the SPD’s operating status,
each PXL is equipped with status
indicator lights.
All units are equipped with integral fusing.
Should the SPD fail and create a short
circuit, the overcurrent will isolate the
fault. These integral fuses are not
replaceable.
All units are equipped with green/red LED
status indicator lights on each phase.
When the green light is illuminated, the
system is operating properly. In the
unlikely case the fuse opens, the LEDs
will change to red and an audible alarm
will signal a fault.
Form C contacts are used for remote
indication of SPD status. Shown in the
de-energized state - fail-safe type
(See
for wire size and color code)
Table 3
Table 3. Size and Color Code
for Form C Contacts
Contact
AWG
Color
NC
14
Orange/White
NO
14
Red/White
NC
14
Blue/White
Example:
Effective 01.06
IM 01005001E
information visit: www.eatonelectrical.com
