Section 5. Warranty
Eaton Powerware warrants these products for a period of 10 years from the date of delivery to the purchaser to be free from defects in
both workmanship and materials. Eaton Powerware assumes no risk or liability for results of the use of the products purchased from it,
including but without limiting the generality of the foregoing: (1) The use in combination with any electrical or electronic components,
circuits, systems, assemblies or any other materials or substances; (2) Unsuitability of any product for use in any circuit or assembly.
Purchaser’s rights under the warranty shall consist solely of requiring Eaton Powerware to repair or at Eaton Powerware’s discretion,
replace free of charge, FOB factory and defective items received at said factory within said term determined by Eaton Powerware to
be defective. The giving of or failure to give any advice or recommendation by Eaton Powerware shall not constitute any warranty by
or impose any liability upon Eaton Powerware. The forgoing constitutes the sole and exclusive remedy of the purchaser and the
exclusive liability of Eaton Powerware AND IS IN LIEU OR ANY AND ALL OTHER WARRANTIES EXPRESSED, IMPLIED OR
STATUTORY AS TO THE MERCHANT ABILITY FITNESS FOR PURPOSE SOLD DESCRIPTION, QUALITY, PRODUCTIVENESS
OR ANY OTHER MATTER.
warranty by or impose any liability upon Eaton Powerware. The forgoing constitutes the sole and exclusive remedy of the purchaser
and the exclusive liability of Eaton Powerware AND IS IN LIEU OR ANY AND ALL OTHER WARRANTIES EXPRESSED, IMPLIED
OR STATUTORY AS TO THE MERCHANT ABILITY FITNESS FOR PURPOSE SOLD DESCRIPTION, QUALITY,
PRODUCTIVENESS OR ANY OTHER MATTER.
In no event shall Eaton Powerware be liable for special or consequential damages or for delay in performance of the warranty.
The product covered by this warranty certificate can only be repaired or replace by the factory. A RETURN MATERIAL
AUTHORIZATION NUMBER (RMA) MUST BE OBTAINED.
Please enter a Vista warranty claim or contact CORE (Center of Returns Excellence) at 1-800-410-2910 for help with entering the
claim or an update on your claim status. For help on troubleshooting the PXL SPD call:
For a detailed failure report, please send an e-mail with the claim number to [email protected]. Repair or replacement will
be returned to collect. If Eaton Powerware finds the return to be a manufacturers defect, the product will be return prepaid.
CSA is a registered trademark of the Canadian Standards Association. Modbus is a registered trademark of Modicon, a division of
Schneider Electric Industries SA. National Electrical Code and NEC are registered trademarks of the National Fire Protection
Association, Quincy Mass. UL is a federally registered trademark of the Underwriters Laboratories Inc.
This warranty does not apply if the product has been misused, abused, altered, tampered with or used in applications other than
specified on the nameplate. At the end of the warranty period Eaton Powerware shall be under no further warranty obligation
expressed or implied.
United States support:
1-800-809-2772
Australia support:
1-300-877-877
South East Asia support:
1-300-322-866
IM 01005001E
information visit: www.eatonelectrical.com
Effective 01.06
PXL Series Installation
and Operation Manual
Instruction Manual
Page 15
Effective: January 2006
