Eaton Power Xpert XP2, Руководство по установке

Страница: 5 / 12

EATON wb-xp2-en 5
Spring Hanger Bracket
Step 1.
Fix Unistrut Size (41 x 41) on fl oor/ wall as per layout
drawing.
Step 2.
Lower busbar into place and connect to Joint
Pack. Ensure the weight of the busbar is supported
throughout.
Only hand tighten joint pack at this stage.
Step 3.
Attach Spring Hanger Brackets to Unistrut with M10
Hex Bolt and Lock Nut, tighten the bolts to 45Nm
±5Nm.
Step 4.
Attach Spring Hanger Brackets to Busbar using fi xing
brackets.
Step 5.
Tighten the joint pack to 65Nm ±5Nm once the spring
hanger bracket has been attached.
Step 6
After inspecting the arrangement to ensure it is
securely installed the hanging support can be removed
from the busbar.
Spring Hanger Brackets are used to support weight of a vertical installation and compensate for minimal building movement
and thermal expansion.