Eaton PDI WaveStar Infinity 2, Руководство по установке и эксплуатации

Страница: 42 / 78

32 Eaton PDI WaveStar Infinity 2 Monitoring System Setup and Operation Manual P-164001106—Rev 01
– Screensaver Time Out : When there is no operator input for the specified period the Monitor loads
the screensaver. This parameter applies to both local and remote users.
– Screen Time Out : When there is no operator input for the specified period the screen goes blank, the
backlight turns off.
• Check Inline Calibration to allow calibration directly from an analog measurement screen. See paragraph
7.2 Inline Calibration for explanation.
• Check Subfeed Cascading to allow subfeeds and panelboards to display as an overlapping cascade on the
HOME screen 1-line mimic. When you have many subfeeds and/or panelboards, cascading allows their
icons to fit on the screen so that you do not have to scroll the HOME screen. See Figure 39
• Check Zero Fault which will monitor the current output and if one of the output’s current drops to Zero
after having a value, a fault will be listed. When this is checked an additional meter will be shown in the
alarm header. See
Figure 20 below.
Figure 20. GENERAL Screen, BASIC Tab, Zero Fault Alarm in Alarm Header
Zero Fault Alarm Monitor
• LOAD DEFAULT loads the parameters created in manufacturing and shipped with the unit.
Setup