![background image](http://html1.mh-extra.com/html/eaton/pdi-wavestar-infinity-2/pdi-wavestar-infinity-2_setup-and-operation-manual_3860123054.webp)
44
Eaton PDI WaveStar Infinity 2 Monitoring System Setup and Operation Manual P-164001106—Rev 01
55..44..11
M
Maaiinn C
Ciirrccuuiittss aanndd S
Suubbffeeeeddss
AC voltage and/or current sensors are used to measure input voltage, transformer output voltage and current,
main feeds to panelboards, and subfeeds. For all analog sensor measurements other than for individual
panelboard circuits, you set alarms in two steps:
1.
Set High and Low limit values that will trigger an alarm.
2.
Choose whether an alarm is issued when a limit is reached.
Panelboard sensor strips provide a richer set of alarm options. See paragraph
Figure 32. Setting Up Analog Limits
Setting up analog alarms
is a two-step process:
1. Set the H/L Alarm
limit value.
2. Check the Alarm
box if Alarms should
be issued for this
measurement.
Command buttons,
High and Low Limit values and Alarm
check boxes are in
bold
lettering
showing that the (logged-in) user
can set limits.
Phase-neutral limits
are set but alarms are
not enabled (boxes
not checked).
Phase-phase limits
are set here with
alarms enabled.
55..44..22
P
Paanneellbbooaarrdd C
Ciirrccuuiittss
Infinity 2 provides a lot of flexibility for monitoring panelboard circuits. There are (3) three types of amperage
alerts:
Warning
and
Alarm
, providing high usage alerts, and
Zero
, providing a low usage alert.
•
Upper Limits:
–
Warning Threshold
as percent of breaker size (default 70%). For a warning to be issued, a circuit
must be above the warning threshold for the specified
Warning Time
(default 5 sec).
–
Alarm Threshold
as percent of breaker size (default 80%). For an alarm to be issued, a circuit must
be above the alarm threshold for the specified Alarm Time (default 5 sec).
•
Lower Limit:
–
Zero
, showing that a circuit that previously measured at least 3A has measured < 0.5A. Zero alert
levels cannot be adjusted.
You can apply these alerts to all circuits uniformly or customize alerts by individual circuit.
Содержание PDI WaveStar Infinity 2
