![background image](http://html1.mh-extra.com/html/eaton/pdi-wavestar-infinity-2/pdi-wavestar-infinity-2_setup-and-operation-manual_3860123046.webp)
36
Eaton PDI WaveStar Infinity 2 Monitoring System Setup and Operation Manual P-164001106—Rev 01
TCP/IP
Tab: Enter up your Ethernet network information:
Figure 24. Setup: NETWORK/PROTOCOLS, TCP/IP Tab
•
Enter your network
IP address
,
Subnet mask
, and
Gateway
address.
•
Alternatively, check
USE DHCP
to have your installation dynamically assign these addresses.
•
The
MAC address
is stored in the ROM chip and cannot be changed.
Changes are not automatically saved. Select
SAVE CHANGES
.
After saving, your Infinity 2 Monitor will reboot with these network parameters.
LOAD DEFAULT
loads network information created in manufacturing and shipped with the unit.
Содержание PDI WaveStar Infinity 2
