Eaton PDI WaveStar BCMS, Инструкция по установке и эксплуатации

Страница: 17 / 54

Eaton PDI WaveStar BCMS Hub Installation and Operation Manual P-164001108—Rev 01 9
C Chhaapptteerr 33 IInnssttaallllaattiioonn
This product must be installed and inspected by licensed electricians or by Eaton-authorized technicians. This
document should not be viewed as sufficient by otherwise non-qualified personnel to operate, service, or
maintain this equipment.
Severe or fatal injury can result from electrical shock during contact with high voltage conductors, monitoring
PCBs, or similar equipment!
• Disconnect power before drilling holes, making cutouts, attaching conduit, or connecting to PDUs, RPPs,
or other power distribution equipment.
• Use Lock Out/Tag Out procedures.
• Wear suitable personal protective clothing and use protective equipment for performing mechanical and
electrical installations.
• Leave ample space for attaching and routing wires.
33..11 M Moouunnttiinngg aanndd C Coonndduuiitt
The enclosure for both the BCMS Hub and the BCMS Dual Hub is 24"W x 24"H x 5"D. The BCMS Hub or BCMS
Dual Hub must be securely mounted on a wall or mounted on a frame attached to poles or another solid
surface. Customers must make their own conduit cutouts on the enclosure.
Figure 4. BCMS Hub and BCMS Dual Hub Enclosures
33..22 C Cuussttoom meerr C Coonnnneeccttiioonnss B BC CM MS S H Huubb
Customer connections are mostly made to the left inside panel. Figure 5 shows inside panels as manufactured.
Figure 6 and Figure 7 show the BCMS Hub wired for a TCP/IP upstream link to a BMS or DCIM system using
the optional Ethernet connection while the upstream Modbus RTU link is not used.