Cutout
13.80
12.52
6.37
6.37
1.75
1.75
5.25
5.25
6.26
7.16
7.16
5.50
5.50
1.90
1.90
6.90
(350.52)
(318.01)
(161.80)
(161.80)
(44.45)
(44.45)
(133.35)
(133.35)
(159.00)
(181.86)
(181.86)
(139.70)
(139.70)
(48.26)
(48.26)
(175.26)
.25 Dia. Slot
(6.35)
.25 Dia. Hole
(6.35)
Cutout Template
The reproduction process may distort this
cutout template. Always check your dimensions
prior to cutting your panel.
Care should be taken when tightening the
nuts. The fasteners must be tightened
enough to obtain a proper seal, but not over
tightened to the point where the threads are
stripped or the gasket is rendered useless.
Always use a torque wrench when installing
your PanelMate unit.
Torque Limits for Studs
10 inch-pounds for #10-32 nuts
Notes:
Dimensions are in inches.
Millimeter dimensions are in parentheses.
