Network Card-MS
Quick Start
www.eaton.com
www.eaton.com
614-20616-00
1. INTRODUCTION
The
Network Card-MS
card has SNMP and HTTP capabilities as well as monitoring through a Web browser interface . It connects to Ethernet
network. In addition, an Environmental Monitoring Probe can be attached to obtain humidity, temperature, smoke alarm, and security information.
With the card, the ATS has its own IP address and uses the local computer capabilities to:
• Supply web pages (http or https (SSL)) with information on status conditions and measurements/settings/alarms,
• Integrate an SNMP-based NMS such as hp OpenView, IBM Tivoli Netview and Computer Associates Unicenter.
• Communicate with IPM (Intelligent Power Manager).
• Send e-mail
• Monitor the Environment Sensor (EMP).
This manual provides all the information required to configure the
Network Card-MS
.
For more information on the supervision, control and configuration functions offered by the Network Management Card, see the user manual available
at http://powerquality.eaton.com.
2. OVERVIEW
ETHERNET PORT
LED Color Status
Description
ACT
G
reen
OFF
Card
not
connected
to
network
O
N
Card
connected
to
network,
but
no
activity
F
lashing
Port
is
sending/receiving
100M
O
range
OFF
Port
operating
at
10
Mbits/s
O
N
Port
operating
at
100
Mbits/s
Service port (Settings/Sensor)
LED Color
Status
Description
Data
G
reen
OFF
Card
starting
O
N
Communicating
with
ATS
F
lashing
Normal
operation,
communication
with
ATS
is
operational
RS232
O
range
OFF
Configuration
menu
activated
O
N
Normal
operation,
configuration
menu
not
activated
F
lashing
Communication
with
Environment
Sensor
(option)
6. SENSOR CONNECTION (option)
The Environment sensor is a
Network Card-MS
option.
For more information, see the user manual of the
Network Card-MS
.
The sensor remotely monitors the ATS environment by periodically measuring the
temperature and humidity, and checking the states of two external contacts. It can also
send alarms (e-mail, SNMP trap) tripped by pre-set thresholds. Connection is made via
the Service port (Settings/Sensor) on the
Network Card-MS
. The sensor is detected
automatically. Configuration and supervision use a menu that may be accessed directly
from the home page.
ETHERNET 10/100BT port
Service port (Settings/Sensor)
Orange LED: RS232 activity
Green LED: communication
with the UPS
MAC address
Orange LED: 10/100M
Green LED: conn
activity