6
INM9466 rev 3
Update Switch Software
This password controlled option allows you to change the software running in the 9466-ET. This
function is only recommended in a controlled environment.
Enable Value Editing
This option asks for a password which will enable value editing. This step is essential for modifying
the details contained on the tabbed pages described in the next sections.
Help
This opens up a PDF version of this document.
9 VLAN
The 9466-ET supports 16 different tag-based VLANS. There are 12 bits in the IEEE802.1Q VLAN
ID field, allowing for 4096 different VLAN ID’s. The 9466-ET supports 16 active VLANs. Any one
of the 4096 available VLAN ID’s can be specified as one of the active VLANs. If a non tagged
packet or a null VID packet is received the 9466-ET will use the ingress ports programmable default
VID for look up.
Click
Enabling Value Editing
and enter the password. In order to use the 802.1Q VLAN, it must be
enabled by selecting the Enabled 802.1Q VLAN checkbox.
As can be seen on the above screen the 16 VLANs can be configured with an ID, port members
and whether currently active.
Also parameters for each of the ports can be set at the bottom, Tag Insertion, Tag Removal, Ingress
Filtering Enable, Discard Non PVID Packets and the Ports Default VLAN ID.
Again as seen on the other page, once the settings have been altered you can Save or Send them
to the switch.
