Eaton MTL831-PS, Инструкция по эксплуатации

Страница: 5 / 27

1 INM MTL831C Rev 7
CAUTIONARY NOTE:
In common with all other electrical apparatus installed in hazardous areas,this apparatus must
only be installed, operated and maintained by competent personnel. Such personnel shall have
undergone training, which included instruction on the various types of protection and installation
practices, the relevant rules and regulations, and on the general principles of area classification.
Appropriate refresher training shall be given on a regular basis. [See clause 4.2 of EN 60079-17].
This instruction manual supplements the requirements of nationally accepted codes of practice,
for example, IEC/EN 60079-14 in Europe. All installations should comply with the relevant
sections of these codes.
In addition, particular industries or end users may have specific requirements relating to the
safety of their installations, and these requirements should also be met.
1 ABOUT THIS MANUAL
The purpose of this manual is to provide the user with information on the installation,
connection and configuration of the MTL831C/MTL831C-PS Analog Transmitter.
1 .1 Related documents
This manual does NOT cover the connection or configuration of the MTL838C
receiver. For details of these items consult:
• INM MTL838C Receiver Instruction Manual
• INM MTL838C-MBT Receiver Instruction Manual
For IS installations the MTL5553 Isolator/power supply will be required. For details
of these items consult:
• INM MTL5500 range manual (MTL5553)
Other related manuals:
• EPS MTL830C Temperature Multiplexer system datasheet
• EPS MTL830C-MBT Temperature Multiplexer system datasheet
• INM MTL838C-MBF
Modbus implementation manual
• INM MTL83xC LLMUX
PC SW Manual - LLMUX
• INM MTL83xC Modbus PC SW Manual - Modbus
• TSN MTL838C Modbus Introduction to Modbus support notes
MTL831C
Analog Transmitter
Figure 1 .1
- MTL831C Analog Transmitter