Eaton Managed ePDU Скачать руководство пользователя страница 89

Страница: 89 / 129

USING THE WEB INTERFACE

EATON

Managed ePDU

User’s Guide

164201xxx Rev 1

DRAFT 10−OCT−2008

Setting the Date and Time

You can set the internal clock on the ePDU manually, or you can link to a Network
Time Protocol (NTP) server and let it set the date and time.

Select

Device Settings

, and then select

Date/Time

. The Date/Time Settings page

displays (see Figure 76).

Figure 76. Date/Time Settings Page

Enter a time zone by selecting the appropriate Coordinated Universal Time (UTC)
offset from the

UTC Offset

list (for example, US Eastern Standard Time = UTC−5).

To set the date and time manually, select the

User Specified Time

option, then

enter the date and time in the appropriate fields. Use the yyyy/mm/dd format for
the date and hh:mm:ss format for the time.

To let an NTP server set the date and time, select the

Synchronize with NTP server

option and enter the IP addresses of primary and secondary NTP servers in the
corresponding fields.

NOTE

If the ePDU’s IP address is assigned through DHCP, the NTP server addresses will be automatically

discovered, then users will not be able to enter any data in the fields of primary and secondary time server.

Click

Apply

. The date and time settings are applied.

Содержание Managed ePDU


































































































































Результаты поиска

Содержание Managed ePDU

Отзывы:

Eaton Managed ePDU, Руководство пользователя, Страница: 89 / 129

Результаты поиска

Содержание Managed ePDU

Отзывы: