Eaton Magnum Power Defense SB Скачать руководство пользователя

Страница: 6 / 58

User Manual

MN013016EN

Effective July 2022

Magnum PXR and Power Defense SB low

voltage power circuit breakers user manual

EATON

www.eaton.com

Figure 1. Family of Magnum PXR low voltage power circuit breakers (800–6000 A)

Safety features

Magnum PXR and PD-SB circuit breakers and associated drawout

equipment are manufactured with built-in interlocks and safety

related features . They are provided to reduce hazards to operating

personnel and provide proper operating sequences .

Low voltage power circuit breaker family name

Breaker family designation number

Breaker frame size in amperes

Interrupting capacity rating

Factory equipped accessories

Figure 2. Typical Magnum PXR nameplate

WARNING

MAGNUM AND POWER DEFENSE CIRCUIT BREAKERS ARE ROBUST AND

ARE PROVIDED WITH SAFETY FEATURES. NEVERTHELESS, THE VOLTAGES,

CURRENTS, AND POWER LEVELS AVAILABLE IN AND AROUND THIS

EQUIPMENT WHEN IT IS IN OPERATION ARE EXTREMELY DANGEROUS

AND COULD BE FATAL. UNDER NO CIRCUMSTANCES SHOULD INTERLOCKS

AND OTHER SAFETY FEATURES BE MADE INOPERATIVE, AS THIS MAY

RESULT IN DEATH, BODILY INJURY, OR PROPERTY DAMAGE.

Safety practices

To protect personnel associated with the installation, operation,

and maintenance of this equipment, the following practices must

be followed:

Only qualified electrical personnel familiar with the equipment,

its operation, and the associated hazards should be permitted

to work on the equipment . Additionally, only qualified personnel

should be permitted to install or operate the equipment .

Always be certain that the primary and secondary circuits are

de-energized or the circuit breaker is removed to a safe work

location before attempting any maintenance .

For maximum safety, only insert a completely assembled breaker

into an energized cell .

Always ensure that drawout circuit breakers are in one of their

designed cell positions, such as CONNECT, TEST, DISCONNECT,

or REMOVE . A circuit breaker permitted to remain in an

intermediate position could result in control circuits being

improperly connected, resulting in electrical failures .

Standard frame

Narrow frame

Double-wide frame

Double narrow frame

Содержание Magnum Power Defense SB



























































Результаты поиска

Содержание Magnum Power Defense SB

Отзывы:

Похожие инструкции для Magnum Power Defense SB

Бренды по названию

Популярные бренды

Eaton Magnum Power Defense SB, Руководство пользователя

Результаты поиска

Содержание Magnum Power Defense SB

Отзывы:

Похожие инструкции для Magnum Power Defense SB

Бренды по названию

Популярные бренды