IQ 100 Series ((130/140/150) Meter
Programming the Meter Using the Front Panel
User and Installation Manual IM02601003E - July 2010 www.eaton.com 45
Using the Main Menu
1. Press the Menu button. The Main Menu screen appears.
• The Reset mode (rSt) appears in the A window. Use the Down button to scroll, causing
the Configuration (CFG) and Operating (OPr) modes to move to the A window.
• The mode that is currently flashing in the A window is the “Active” mode, which means it is the
mode that can be configured.
For example: Press Down Once- CFG moves to A window. Press Down Once - OPr moves to A window.
2. Press the Enter button from the Main Menu to view the Parameters screen for the mode that is
currently active.
Using Reset Mode
Reset Mode resets
all
of the Max and Min values in the meter.
NOTE: With the communication option, you can reset both the Max/Min values
and the energy accumulators. If you do not have the communication option,
you cannot reset the energy accumulator fields.
Press the Enter button while rSt is in the A window. The Reset All? No screen
appears.
• If you press the Enter button again, the Main Menu appears,
with the next mode in the A window. (The Down button
does not affect this screen.)
• If you press the Right button, the Reset All? YES screen appears.
Press Enter to reset the meter’s Max and Min values.
CAUTION!
Reset All? YES resets
all
Max and Min values. Only press Enter
if this is what you want to do.
NOTE: If Password Protection is enabled for Reset, you must
enter the four digit Password before you can reset the meter.
(See page 58 for information on Password Protection.)
To enter a password, follow the instructions on the next page.
Once you have performed a reset, the screen displays “rSt All donE” and then resumes auto-scrolling
parameters.
